3D print 101 Park Avenue
A free, printable model of 101 Park Avenue, a tall rectangular tower, and the dense Manhattan skyscrapers and streets around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About 101 Park Avenue
In Manhattan's Murray Hill neighborhood, on Park Avenue at 41st Street, 101 Park Avenue rises 192 m (629 ft). It opened in 1982, and Eli Attia Architects designed it. The building has its own ZIP Code, 10178, and holds a mix of tenants along with several attractions and amenities.
The tower turns up often on screen. Escape from the Bronx (1983) uses it as the base of the General Construction (GC) Corporation, and in The Secret of My Success (1987) its facade stands in for the fictional "Pemrose building". In Gremlins 2: The New Batch (1990) it plays the fictional "Clamp Center". In a handful of episodes in Seinfeld's ninth season, it houses George Costanza's office.
Its roof appears in Friends with Benefits (2011), and it serves as a crash site in The Avengers (2012). The roof also featured in the 1985 opener of the second season of Miami Vice. The final shots of the clip for Michel Petrucciani's piece Looking up were filmed on the roof too.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 53 mm | 1:3,750 |
| 200 mm | 66 mm | 1:3,000 |
| 256 mm | 85 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- A tall slab with a window grid
- The tower is a plain slab covered in fine window lines. A layer height of 0.12–0.16 mm and a larger print size keep the grid crisp; Full detail suits a fine nozzle.
- Tall, narrow print
- At full height the model is slender, so print slowly with good cooling to keep the walls clean near the top.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 101 Park Avenue takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
101 Park Avenue is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a 101 Park Avenue STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. 101 Park Avenue grows with the print: about 53 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
