3D print 175 Water Street
A free, printable model of 175 Water Street, a tower with a rounded, stepped top, among the tall buildings of lower Manhattan, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About 175 Water Street
The office building at 161 Water Street, which was formerly called 175 Water Street, stands in the Financial District, in Manhattan, New York City. It is also called the Water Street Associates Building. Fox & Fowle designed it, and it was completed in 1983. National Westminster Bank leased the whole building before it was finished.
Three commercial buildings from the 19th century had stood on the site. In 1982, while the new building was under construction, an archaeological excavation uncovered an 18th-century ship. Parts of the ship, along with other artifacts, ended up at the Mariners' Museum in Newport News. AIG bought the building from National Westminster Bank in 1995, and it became AIG's headquarters in 1996. The firm moved out in 2021 and moved to 1271 Avenue of the Americas, a new headquarters. The building has also hosted parties and fashion shows.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 33 mm | 1:3,750 |
| 200 mm | 42 mm | 1:3,000 |
| 256 mm | 53 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Rounded, stepped crown
- The top of the tower is rounded and steps in. A layer height of 0.12 to 0.16 mm keeps the curve smooth.
- Tall neighbors close by
- Tall buildings stand close around the tower in the model. A larger print size keeps the gaps between them easier to read.
- One piece with the ground
- 175 Water Street is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 175 Water Street takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
175 Water Street is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a 175 Water Street STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. 175 Water Street grows with the print: about 33 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
