3D print 740 Park Avenue
A free, printable model of 740 Park Avenue, a stepped apartment tower surrounded by Upper East Side buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 78 m
- On a 160 mm print
- 22 mm
- Scale
- 1:3,750
78 m of 740 Park Avenue, 22 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Stepped setbacks and rooftop boxes
The upper floors step back into smaller towers with small rooftop structures. Print friendly adapts these to your print scale; Full detail keeps them, best on a larger print.
- Tall narrow frontage
The building is tall relative to its footprint, so a slow print speed and good cooling help the upper levels. A 0.12-0.16 mm layer height keeps the window rows clean.
- One piece with the ground
740 Park Avenue is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 740 Park Avenue takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About 740 Park Avenue
740 Park Avenue is a high-end co-op apartment tower. It occupies the western side of Park Avenue, in the block from East 71st to East 72nd Street, within Lenox Hill on Manhattan's Upper East Side. A side entrance has the address 71 East 71st Street, and the building is described as pre-war.
The tower rises 19 stories in an Art Deco design, with an architectural height of 256.0 feet (78.0 m). It holds 31 units, among them duplexes and triplexes. James T. Lee built it in 1929, and Rosario Candela and Arthur Loomis Harmon designed it. Harmon joined a firm that was renamed Shreve, Lamb and Harmon while the work was under way.
Its official opening came in October 1930, one year into the Great Depression. That timing proved devastating, and by 1933 the venture had failed financially. In 2005 the author Michael Gross published a book on the building's history, and in 2012 a documentary based on that book aired on the PBS series Independent Lens.
About this model
740 Park Avenue is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
