A white 3D print of 90 Church Street, a block-sized building with stepped roof sections, surrounded by much taller towers in Lower Manhattan.

3D print 90 Church Street

A free, printable model of 90 Church Street, a block-sized building squeezed between much taller Lower Manhattan towers, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • 90 Church Street model, North view North
  • 90 Church Street model, East view East
  • 90 Church Street model, South view South
  • 90 Church Street model, West view West
On a 160 mm print
22 mm
Scale
1:3,750

22 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Block surrounded by towers

    The building fills a block but sits low among much taller towers, so it can look small in a compact print. A larger print size keeps more of its facade detail.

  2. Rooftop details

    The roof has stepped sections and small structures. Print friendly adapts these to the print scale; Full detail keeps them for larger prints, ideally with a layer height of 0.12 to 0.16 mm.

  3. One piece with the ground

    90 Church Street is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 90 Church Street takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About 90 Church Street

Lower Manhattan has 90 Church Street, a federal office building that takes up a whole block, bounded by Church Street, West Broadway, Vesey Street and Barclay Street. It holds the Church Street Station of the United States Postal Service, which handles the 10007 ZIP Code. The designers were Louis A. Simon, who held the post of Supervising Architect at the Treasury Department at the time, with the firms Cross & Cross and Pennington, Lewis & Mills.

Its style blends Neo-classicism and Art Deco, and the limestone-clad facade rises in two towers. Construction ran from 1934 to 1937, and a six-story addition was put on top in 1938. In 1989 it was listed on the National Register. Boston Properties carried out a large renovation from the early 1990s through 2000, working with Brannen Associates and Swanke Hayden Connell Architects.

During the September 11 attacks, falling debris, including a piece of one of the planes, landed on the roof. The facade was damaged, windows broke, the roof was seriously burned and water damage spread through the interior. The building was contaminated by dust and other materials, but it had no major structural damage. The post office reopened in August 2004 and began processing mail there again.

About this model

90 Church Street is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Same skyline

More landmarks in New York