3D print the Bleecker Street Cinema
A free, printable model of the Bleecker Street Cinema building, a low block with a columned front between taller neighbors, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Bleecker Street Cinema in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Narrow front between tall neighbors
The building is a low, narrow block whose columned front and window trim are small. Full detail keeps them, and a larger print size and a 0.12 mm layer height help them stay crisp.
- One piece with the ground
The Bleecker Street Cinema is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Bleecker Street Cinema takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Bleecker Street Cinema
At 144 Bleecker Street in Manhattan stood the Bleecker Street Cinema, an art house movie theater. By screening foreign and independent films, it became a Greenwich Village landmark and a venue with real influence on filmmakers and cinephiles. Lionel Rogosin, a filmmaker and social activist, founded the 200-seat theater in 1960 to show his 1959 film Come Back, Africa, which was controversial.
The building dates to 1832, when it was put up as a pair of rowhouses, numbers 144 and 146. In 1883 Placido Mori converted 144 into a restaurant. In 1920 he had Raymond Hood, then a novice architect, design a new facade that took in both houses. Hood gave the ground floor Doric columns, topped the windows with Federal-style lintels that were imitations, and added a setback penthouse studio. By 1959 New York University owned the building.
Sid Geffen bought the theater in either 1973 or 1974 and operated it together with his wife. By the end it had a main auditorium with 171 seats plus the James Agee Room, which had 78 seats. The theater shut on September 6, 1990. By that November it had reopened as a theater showing gay adult films; it later went back to art films before closing for good on September 2, 1991.
About this model
The Bleecker Street Cinema is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Outside the United States this design may still be protected; check the rules where you sell.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





