A white 3D print of Congregation Kehilath Jeshurun, a low building with arched windows and a railed roof terrace, set between much taller buildings.

3D print Congregation Kehilath Jeshurun

A free, printable model of Congregation Kehilath Jeshurun, a low, arched building with a railed roof terrace, set between much taller buildings, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Congregation Kehilath Jeshurun model, North view North
  • Congregation Kehilath Jeshurun model, East view East
  • Congregation Kehilath Jeshurun model, South view South
  • Congregation Kehilath Jeshurun model, West view West

© OpenStreetMap contributors

The model you print

Congregation Kehilath Jeshurun in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
7 mm
Scale
1:3,750

7 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Thin rooftop railing

    A slim balustrade runs along the roof terrace. Print friendly adapts thin parts like this to the print scale; Full detail keeps them for larger prints. Print slowly if the railing looks fragile.

  2. A low building among tall ones

    The building is low and mostly hidden between much taller neighbors, so it prints small. A bigger print size and 0.12–0.16 mm layers help keep its arched windows readable.

  3. One piece with the ground

    Congregation Kehilath Jeshurun is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Congregation Kehilath Jeshurun takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Congregation Kehilath Jeshurun

KJ, or CKJ, is short for Congregation Kehilath Jeshurun, a Modern Orthodox Jewish synagogue on Manhattan's Upper East Side at 126 East 85th Street. Its founding came in 1872, under the name Anshe Jeshurun. The building the congregation put up in 1902 is neoclassical and Romanesque in style. Ramaz School, closely tied to the synagogue, has its lower school in an adjoining building, opposite the middle school.

Moses Zevulun Margolies was rabbi from 1906 to his death in 1936, and the Ramaz name comes from his initials. His grandson-in-law, Joseph H. Lookstein, founded the school and followed him as Senior Rabbi. On June 14, 1958, Lookstein's son Haskel was installed as an assistant rabbi, and he became Senior Rabbi in 1979 after his father died. Haskel was among the six students of Ramaz's first class when the school opened in 1937.

In July 2011, a fire during minor renovations badly damaged the interior, and the congregation temporarily moved to the 92nd Street Y. Close to half of the forty stained glass windows in the sanctuary were lost and recreated with historical and forensic analysis. Rebuilding restored the synagogue and also added a wing for education and fitness at the school, 8,000 square feet (740 m2) on two new floors above the synagogue. The redevelopment cost $21 million and won a 2016 Gold Award from Building Design+Construction in the Reconstruction category.

About this model

Congregation Kehilath Jeshurun is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Outside the United States this design may still be protected; check the rules where you sell.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in New York

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits