A white 3D print of The Centrale, a slender tower with stepped setbacks at the top, rising among crowded Midtown Manhattan skyscrapers.

The Centrale in 3D

The Centrale appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • The Centrale model, North view North
  • The Centrale model, East view East
  • The Centrale model, South view South
  • The Centrale model, West view West

© OpenStreetMap contributors

Copyright notice

The design of The Centrale may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

Real height
245 m
On a 160 mm print
66 mm
Scale
1:3,750

245 m of The Centrale, 66 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Pencil-thin tower

    The tower is very slender for its height and steps in near the top. Print it slowly with good cooling so the shaft stays straight, and use a layer height of 0.12–0.16 mm for crisp setbacks.

  2. Tight Midtown blocks

    Tall neighbors crowd close on every side, so a bigger print size keeps the gaps between towers open and their rooftop details readable.

  3. One piece with the ground

    The Centrale is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Centrale takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About The Centrale

The Centrale, at 138 East 50th Street, is a residential building in Midtown East, Manhattan, New York City, on the block between Third Avenue and Lexington Avenue. It holds 124 condominium homes above ground-floor shops covering 7,500 square feet (700 m2). The glass, steel and concrete tower stands 245 m (803 ft) tall with 64 stories.

Extell Development Company paid $61 million for the site in January 2012, then sold it in August 2014 to Ceruzzi Properties. Plans filed in June 2014 showed a 52-story hotel with 764 rooms, but renderings released in September 2015 revealed a 64-story condominium tower instead. Construction began in mid-2016, the tower topped out in November 2017, and the building was finished in early 2019.

About this model

The Centrale is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in New York

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits