3D print Federal Hall
A free, printable model of Federal Hall, set among tall buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Federal Hall in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Small among tall neighbors
The memorial sits low among much taller buildings, so its details are small. A larger print size keeps more of them, and a layer height of 0.12–0.16 mm helps them stay crisp.
- One piece with the ground
Federal Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Federal Hall takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Federal Hall
Federal Hall National Memorial sits on Wall Street, in New York City's Lower Manhattan. It is a Greek Revival–style building finished in 1842 to serve as a customs house for the city. Its site held the earlier Federal Hall, the United States' first capitol under the Constitution, which stood there from 1703 to 1812. That earlier hall housed the First United States Congress and hosted the swearing-in of George Washington as first president.
The earlier structure went up between 1699 and 1703 and began as the second city hall of New York. In 1765 it hosted the Stamp Act Congress, ahead of the American Revolution. From 1785 to 1789 it housed the Congress of the Confederation, the first central government of the nation under the Articles of Confederation, and it was enlarged and updated. In 1789 it welcomed the 1st Congress, which among other laws approved a scheme for founding Washington, D.C. as the capital. The old hall was torn down in 1812, some years after Congress left in 1790.
Ithiel Town and Alexander Jackson Davis designed the existing building as the city's U.S. Custom House. It served as a Subtreasury from 1862 to 1925, and it began a new life in 1940 as a public memorial. The walls are Tuckahoe marble, with a colonnade of Doric columns and a domed rotunda by the sculptor John Frazee. Outside it stands a large statue of George Washington made by John Quincy Adams Ward.
About this model
Federal Hall is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





