3D print the Hopewell Centre (Hong Kong)
A free, printable 3D model of Hopewell Centre and the surrounding streets and buildings of Hong Kong, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Hopewell Centre (Hong Kong) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 222 m
- On a 160 mm print
- 65 mm
- Scale
- 1:3,750
222 m of the Hopewell Centre (Hong Kong), 65 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A round tower
A circular tower has no flat sides, so a layer height of 0.12–0.16 mm helps keep the curved walls smooth. Printing slowly with good cooling helps the upper floors stay clean.
- One piece with the ground
The Hopewell Centre (Hong Kong) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Hopewell Centre (Hong Kong) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Hopewell Centre (Hong Kong)
Hopewell Centre is a 222-meter (728-foot), 64-story skyscraper on Queen's Road East (number 183) in Wan Chai, on Hong Kong Island. It was Hong Kong's first round skyscraper. The property firm Hopewell Holdings Limited constructed it and gave the tower its name, and its headquarters sit inside.
Work started in 1977 and ended in 1980. Once finished, it overtook Jardine House as the tallest building in Hong Kong, and at that moment it was the second tallest in Asia. It held the Hong Kong title until the completion of the Bank of China Tower in 1989.
The floor plan is circular. The front entrance leads to escalators that take people up to a lift lobby on the 3rd floor, and because the tower stands on a steeply sloping hill, its back entrance toward Kennedy Road is on the 17th floor. A round private pool on the roof was built for feng shui reasons, since people felt the building looked like a cigarette. A revolving restaurant on the 62nd floor completes one 360-degree turn every hour.
About this model
The Hopewell Centre (Hong Kong) is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
