3D print the James Watson House
A free, printable model of the James Watson House, with its small bell tower and curved front, and the large buildings beside it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Bell tower and cornice
A small bell tower with a cross sits above the front, and a railed cornice runs along the roofline. Full detail keeps them on a larger print; Print friendly simplifies them at small sizes.
- Curved colonnaded front
The curved front has slender columns and balconies. A layer height of 0.12–0.16 mm and a bigger print size keep these thin parts crisp.
- One piece with the ground
The James Watson House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The James Watson House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the James Watson House
Number 7 State Street, a block lying between Pearl Street and Water Street in Manhattan's Financial District, is the address of the James Watson House. It lies close to Manhattan's southern tip, opposite Battery Park. Its first section dates to 1793, and an extension followed in 1806. The building serves as the rectory for the shrine to St. Elizabeth Ann Bayley Seton.
James Watson, a prosperous importer-exporter and Yale graduate, was the New York State Assembly's first Speaker and sat in the Senates of both New York and the United States as a Federalist. In 1806 he sold the house to Moses Rogers, who joined it to the residence next door. A colonnaded portico was added to unify the facade, reportedly made from masts of Rogers's merchant ships. No architect is known for the original eastern half, whereas the western extension is attributed to John McComb, Jr.
In 1885, the house was bought for a mission set up to protect Irish immigrant girls, which used it as a way station for young women arriving from abroad. The mission gave 70,000 girls a home on State Street and found jobs for more than 12,000 young women. The city designated the house a landmark in 1965, and it joined the National Register of Historic Places in 1972.
About this model
The James Watson House is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
