3D print the Judge Building
A free, printable model of the Judge Building squeezed among taller towers and streets in Manhattan, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 13 mm
- Scale
- 1:3,750
13 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Cornice and arched windows
The top of the building has a projecting cornice and arched windows, which are the finest parts of the model. Layers of 0.12–0.16 mm keep them crisp; Full detail keeps every one on a larger print.
- One piece with the ground
The Judge Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Judge Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Judge Building
The Judge Building was first called the Goelet Building. It rose to ten stories in 1888 at 110 Fifth Avenue, at 16th Street, in Manhattan’s Flatiron District, and McKim, Mead, and White designed it. The name comes from Judge magazine, which was printed there. The site is 28.0 by 48.3 meters (92 by 158.4 feet).
The property belonged to the Goelet family. In 1889 the building grew by absorbing the neighboring piano warehouse at 112 Fifth Avenue, which belonged to William Knabe & Company. A show of three thousand dolls opened there on December 15, 1890, the first such show in the United States. The New York Times Company bought the building in 1985, and it was then occupied mostly by Family Circle, a Times Company magazine.
The New York Historic Districts Council, in the mid-1980s, replaced a rotted metal cornice with a molded fiberglass one in a stepped design, with a prominent row of ornamental blocks called dentils. Its third-floor arches, which had been lost in 1903 when three floors were added, were rebuilt as well.
About this model
The Judge Building is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
