3D print the Lescaze House
A free, printable model of the Lescaze House, a small, low townhouse tucked among much taller buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Lescaze House in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A very small, low house
The house is only a few stories tall and sits behind much taller buildings, so it prints small. A larger print size keeps its roofline and rooftop boxes readable.
- Tiny rooftop pieces
Small boxes and a pyramid-shaped skylight sit on the flat roof. Print friendly adapts such small details to the print scale; Full detail keeps them for larger prints, ideally with 0.12–0.16 mm layers.
- One piece with the ground
The Lescaze House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Lescaze House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Lescaze House
Four stories tall, the Lescaze House is in Manhattan's East Midtown and Turtle Bay neighborhoods, at 211 East 48th Street. It lies between Second Avenue and Third Avenue, along the north side of the street. William Lescaze designed it in the International Style during 1933 and 1934, turning a 19th-century brownstone townhouse into a modern home. The house is one of three that Lescaze designed in Manhattan.
The facade combines white-painted stucco blocks with glass block windows. These were the first glass blocks to appear on any New York City building, installed for insulation and privacy while still letting light through. The living room wall on the third floor holds 680 blocks. Lescaze planned the ground level for his office and the upper floors for his family, and he designed much of the furniture himself. He and his wife Mary moved in during June 1934.
The original brownstone dated to 1865, when Elias and Daniel Herbert built it as part of a row on the same block. The house is among the few remaining New York structures that architects or artists designed as their own residences. Later owner Sage Realty called it the first modernist house in the city. The city's Landmarks Preservation Commission designated it an official landmark in 1976, and in 1980 it was also listed on the National Register of Historic Places.
About this model
The Lescaze House is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Outside the United States this design may still be protected; check the rules where you sell.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





