3D print Masjid Hamza
A free, printable model of Masjid Hamza with its domes and slim tower, and the streets and buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Domes and slim tower
Two low domes sit on the roof next to a slim tower with a finial. The tower is the thinnest part; print slowly with cooling near the top, or use Print friendly.
- One piece with the ground
Masjid Hamza is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Masjid Hamza takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Masjid Hamza
Masjid Hamza, at 200 Stuart Avenue in Valley Stream, New York, serves as a mosque and an Islamic community center. A K–6 school, Hamza Academy, operates alongside the mosque, and the masjid is fifteen minutes from John F. Kennedy International Airport.
People can use it for the five daily prayers, Quran classes for adults and children, and Taraweeh during Ramadan. The masjid began as a two-bedroom house. As the Muslim community in Valley Stream grew, it moved into a bigger building in 2007, and it later bought three adjacent properties for expansion.
About this model
Masjid Hamza is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
