3D print One57
A free, printable model of One57 and the skyscrapers and streets of Midtown Manhattan around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About One57
One57, formerly called Carnegie 57, is a supertall skyscraper on West 57th Street, at number 157, in Midtown Manhattan, between Sixth and Seventh Avenues. A 210-room Park Hyatt hotel occupies the lower floors, with 92 condominium units on top. Extell Development Company, led by Gary Barnett, was the developer, and the architect was Christian de Portzamparc, with Goldstein, Hill & West Architects handling the design details. Billionaires' Row, a stretch of 57th Street, got its first ultra-luxury condominium tower in One57.
The facade uses panes in dark and light blue, combined with pewter and silver tones and arranged in vertical stripes. De Portzamparc compared the patterning on the north and south sides to the work of the Austrian painter Gustav Klimt, which he cited as inspiration for the design. The roof is curved, and the 57th Street side has several setbacks that resemble waterfalls, while the 58th Street side, which faces Central Park, is flatter and has no setbacks. Four liquid tuned mass dampers stabilize the top.
Gary Barnett began acquiring the site in 1998, building plans were filed in 2009, and construction started in 2010. The top floor was reached by mid-2012. After its completion in 2014, One57 held the title of the city's tallest residential building for a few months, until 432 Park Avenue was completed.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 83 mm | 1:3,750 |
| 200 mm | 104 mm | 1:3,000 |
| 256 mm | 132 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- A tall, narrow tower
- The tower is tall and slim, with a curved top. Print slowly with good cooling, and use layers of 0.12 to 0.16 mm to keep the curved crown crisp.
- Fine vertical stripes
- Fine vertical stripes run down the facade. Print friendly adapts them to your print scale; Full detail keeps them, which suits a larger print or a fine nozzle.
- One piece with the ground
- One57 is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. One57 takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
One57 is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a One57 STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. One57 grows with the print: about 83 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
