3D print the Puck Building
A free, printable model of the Puck Building and the mid-rise blocks that crowd around it in downtown Manhattan, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 15 mm
- Scale
- 1:3,750
15 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Parapet finials and water tank
The roofline carries small posts along the parapet, stepped penthouse blocks and a water tank. Print friendly adapts these small parts; Full detail keeps them for bigger prints.
- Layers of arched windows
The tall brick facade is covered in arcades and narrow windows. A larger print size and a 0.12-0.16 mm layer height keep the arch lines distinct.
- One piece with the ground
The Puck Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Puck Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Puck Building
The Puck Building stands at 295–309 Lafayette Street, in Manhattan's Nolita and SoHo areas. Albert Wagner designed it in the Romanesque Revival style, with touches drawn from the German Rundbogenstil. The northern part is an original seven-story building, and an annex of nine stories lies to the south. The whole structure fills a full block, with Lafayette Street on the west, Houston on the north, Mulberry on the east and Jersey on the south.
The brick facade is red and split into bays of equal width and into tiers of arcades, whose arches are wider at the top and narrower at the bottom. Henry Baerer made two sculptures of Puck, the Shakespeare character, for the facade, and a penthouse structure caps the building. The street's extension through the area in the late 1890s led to demolition of the western section. Herman Wagner designed the new Lafayette Street front, in a style close to the original.
The building long housed Puck magazine, a cartoon humor title. Its founders, Joseph Keppler and Adolph Schwarzmann, bought the land in 1885 alongside J. Ottmann. The first building was done a year later, and the annex followed between 1892 and 1893. Puck magazine closed in 1918, and printing firms used the structure for decades afterward. It has New York City landmark designation and a National Register listing as well.
About this model
The Puck Building is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
