3D print The Pierre
A free, printable 3D model of The Pierre, with its tall shaft and ornate sloped crown, and the buildings, park and water beside it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 160 m
- On a 160 mm print
- 43 mm
- Scale
- 1:3,750
160 m of The Pierre, 43 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Ornate crown with dormers
The sloped copper-style roof is studded with tiny round dormers and ornamental trim. Print friendly adapts them to your print scale; Full detail keeps them, which suits a larger print or a fine nozzle.
- Tall shaft with stepped base
A tall, slim shaft rises over a stepped base. Print slowly with good cooling, and use a layer height of 0.12 to 0.16 mm to keep the upper tower crisp.
- One piece with the ground
The Pierre is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Pierre takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About The Pierre
The Pierre is a luxury hotel in Manhattan, on the corner where Fifth Avenue meets East 61st Street (its address is 2 East 61st Street), facing Central Park. Schultze & Weaver designed it, and it opened in October 1930. It stands 525 feet (160 m) tall and has 41 stories. In 1981, New York City's Landmarks Preservation Commission designated the Upper East Side Historic District, which includes the hotel.
The hotel replaced the Gerry mansion that stood at Fifth Avenue and 61st Street. It cost $15 million to build, and its site allowed unrestricted views over Central Park. A limestone-fronted Louis XVI base supports a shaft of blond brick. The uppermost floors, which make the hotel easy to recognize on the New York skyline, take their pattern from the Royal Chapel at Versailles, a work by Mansart: Corinthian pilasters, arch-headed windows, octagonal ends and a tall copper roof that slants, set with round bull's-eye dormers finished in bronze.
Charles Pierre, a restaurateur, joined a group of Wall Street financiers in a joint venture after selling his restaurant; the hotel then rose on the site. The group included Otto H. Kahn, Edward F. Hutton and Walter P. Chrysler. India's Taj Hotels Resorts and Palaces acquired the hotel in 2005.
About this model
The Pierre is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
