3D print Sant'Ignazio, Rome
A free, printable 3D model of Sant'Ignazio in Rome, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Sant'Ignazio, Rome in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Church front and roofline
A large church has fine detail in its front and roofline. Print friendly adapts thin parts to the print scale; Full detail keeps every modeled feature, which suits a larger print or a fine nozzle.
- One piece with the ground
Sant'Ignazio, Rome is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Sant'Ignazio, Rome takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Sant'Ignazio, Rome
Sant'Ignazio is a Catholic church in Rome, Italy, dedicated to Ignatius of Loyola, who founded the Society of Jesus. It was built in the Baroque style between 1626 and 1650. At first it was the chapel for the neighboring Roman College, later called the Pontifical Gregorian University. It is counted among the great 17th century preaching churches of orders of the Counter-Reformation, in Rome's Centro Storico.
Pope Gregory XV, who had studied at the Collegio Romano, suggested a new church after Ignatius was canonized in 1622. Cardinal Ludovico Ludovisi chose the plans of the Jesuit mathematician Orazio Grassi, and the foundation stone was laid on August 2, 1626. When complete, the church occupied a quarter of the whole block. It opened for public worship in 1650 and was solemnly consecrated only in 1722.
The plan is a Latin cross with many side chapels, and a ring of Corinthian pilasters runs around the interior. No money was available for a dome, so around 1685 the Jesuit lay brother Andrea Pozzo painted the illusion of one on canvas at the crossing. He also painted the nave ceiling fresco, using perspective to make the barrel vault appear open to the sky. A marble disk set in the nave floor marks the best viewing point.
About this model
Sant'Ignazio, Rome is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
