3D print The Harbourfront Landmark
A free, printable model of The Harbourfront Landmark, a Hong Kong residential tower, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
The Harbourfront Landmark in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 233 m
- On a 160 mm print
- 65 mm
- Scale
- 1:3,750
233 m of The Harbourfront Landmark, 65 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall residential tower
On a tall tower, a layer height of 0.12–0.16 mm keeps fine vertical detail crisp, and printing slowly with good cooling helps the upper floors.
- One piece with the ground
The Harbourfront Landmark is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Harbourfront Landmark takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About The Harbourfront Landmark
The Harbourfront Landmark is a luxury apartment tower in Hung Hom Bay on the Kowloon Peninsula, Hong Kong. It has 70 floors, is 233 meters tall, and was completed in 2001. The glass curtain walls of this waterfront residence frame wide views over Victoria Harbour. It contains 324 residential units, and penthouse apartments occupy the top floors.
A clubhouse on the 7th floor is open to residents and visitors. Its swimming facilities include three pools: a main pool at most 1.2m deep, a children's wading pool at most 0.6m deep, and a jacuzzi made up of two smaller ones. The tower stands in Whampoa, a few minutes from the ferry pier at Hung Hom, from Whampoa Station, and from the bus terminus at Whampoa Garden.
About this model
The Harbourfront Landmark is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
