3D print Trump Palace Condominiums
A free, printable model of the slender tower and its stepped, layered crown, with the surrounding buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Trump Palace Condominiums
Trump Palace Condominiums is a New York City skyscraper rising 623 ft (190 m) with 54 floors at 200 East 69th Street, in Manhattan's Upper East Side. It was completed in 1991. Frank Williams and Associates, a firm led by the architect Frank Williams, designed it. For 26 years it was the tallest building on the Upper East Side, until 520 Park Avenue surpassed it in 2017.
The New York Foundling Hospital had occupied the site before businessman Donald Trump bought it in 1985. Before the sale, community groups had lobbied city agencies without success to stop a high-rise from being built there. Building work started in April 1989, aiming for completion in 1991 and costing $185 million. Community groups also tried unsuccessfully to have the tower's height reduced. Frank Williams gave the tower a look that recalls Art Deco buildings from the 1920s and 1930s. Low-rise townhouses and a small plaza sit at its base, both of them part of a zoning requirement.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 50 mm | 1:3,750 |
| 200 mm | 63 mm | 1:3,000 |
| 256 mm | 80 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Stepped crown and ledges
- The top of the tower steps inward in thin layers, and thin ledges mark the shaft below. Print friendly adapts these thin parts to the print scale, while Full detail keeps them on larger prints.
- Tall and slender
- A tall slim tower prints best slowly, with good cooling. Layers of 0.12 to 0.16 mm keep the fine vertical lines on its sides crisp, and a larger print size keeps more of them.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Trump Palace Condominiums takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Trump Palace Condominiums is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Trump Palace Condominiums STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Trump Palace Condominiums grows with the print: about 50 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
